Damaged tires
The first part
Full details of the dealership where the tire was purchased.
Part II
Full details of the customer
Purchase date: Enter the purchase date on the purchase invoice.
third part
Tire specifications
Brand: WESTLAKE / GOODYEAR / TIANLI
“Gol Tair” pattern: Gol Tair is carved on the wall of Tair
Size: It is engraved on the wall of the tire
Serial number: The serial number consists of a series of numbers and Latin letters engraved on the tire wall
Manufacturing date: including 4 Latin numbers on the tire wall
Remaining tread depth (mm): Measure with a tread depth gauge and enter in millimeters.
The fourth section
Type of vehicle: 1- passenger 2- inner-city bus 3- extra-urban bus 4- middle bus 5- minibus 6- truck 7- truck 8- trailer 9- tractor 10- tractor 11- road construction vehicles 12- special vehicles 13- Agricultural vehicles 14- Mining machines
Brand: The car brand should be mentioned: Volvo, Renault, Komatsu, etc
Vehicle model: mention the year of vehicle construction
Does the car have a technical inspection certificate or not?
Average speed: mention the average driving speed
Maximum loaded weight (tons): Enter the maximum weight of the load that is loaded.
The fifth section
Specifications of the damaged tire:
Type of damage: Briefly mention the type of damage, for example, double skin, abrasion, burst, dent or bump.
Damage description: Briefly describe the cause of the damage.
Photo: 8 photos should be prepared according to the instructions mentioned in the form and attached to the form.
First photo: Take a photo of the tire size
Second photo: Take a photo of tire flower
Third photo: Take the serial number clearly.
Fourth photo: taken from the date of construction.
Fifth photo: Take a close-up photo of the damaged section.
Sixth photo: take a close-up photo of the damaged section with the help of a ruler to measure the damaged section. The damaged part should be marked with ketchup.
Seventh photo: View of the damaged section with a wider angle of view
Eighth photo: By placing a tread depth gauge, the remaining tread depth should be measured and photographed.